The garage door is the largest moving part of your house and goes up and down about a thousand times each year. Therefore, it is important to keep it well-maintained to let it function properly, effectively and smoothly. When it comes to garage door maintenance, there are a number of tips that can be followed by the homeowners to make sure it keeps working properly. So there is no need to replace it with a new one or spend money in unnecessary repairs. You should conduct thorough maintenance of your garage door every three months at least or when needed.
Keeping your garage door well-maintained is no rocket science. All you need is to know some tips and tricks and you will have a garage door that moves and works as seamlessly as a new one. To help all the homeowners out there who are not sure what needs to be done for their garage door maintenance, here are some important tips to get you started.
1. Proper Cleaning of the Garage Door Track
If your garage door is making squeaking noises or has become sticky, it is not right to spray the garage door track with a lubricant right away. This will not help in making the garage door work properly and the garage door track will also be affected. Spraying a suitable garage door lubricant over the garage door track without properly cleaning it first can lead to the accumulation of particulate matter that will harden over time and will affect the seamless functioning of your garage door.
Instead of hurrying to lubricate the garage door when it is getting sticky of making noises, you should first clean the garage door track thoroughly. All it takes is some simple wiping of the inside of the garage door track using a clean damp cloth. Once the inside of the track is clean, wipe it off with a dry cloth and then apply the lubricant. If you are in need of a solution to get rid of the sticky residue left on the garage door track, you can make use of WD-40. WD-40 is ideal for a garage door lubricant.
2. Installation of Weather Seals
If you are looking to save energy, installation of weather seals in the garage door is a great option. This will also prevent any moisture from entering the garage. Therefore keeping the insides of the garage safe and sound. Weather seals should be applied on the lower side of the garage door, on the frame of the door, and between the panels of your garage door for their effective functioning.
3. Realignment of the Garage Door Sensors
The sensors of the garage door are an important component needed for the proper functioning of garage doors. One reason they may not be working properly is because they may be knocked out of line and needs realignment. All you need to do to realign the garage door sensors is to gently push them in the right direction and position. They need to be facing each other to be in the right position. If they are not aligned correctly, you will see blinking of lights which is an indicator that they are in need of alignment. Once they are realigned and repositioned properly, you will see the blinking lights disappear and replaced with a solid light.
4. Reset the Opener of the Garage Door
If the garage door closes for a brief amount of time before automatically opening. Or if it stops working before it reaches the bottom, there is a need to reset the garage door opener. There are specific reset instructions for each garage door, however, the basic steps to follow are
- Shut the power supply to the garage door
- Wait for 10 seconds
- Turn the power back on
Once the door is powered on again. Press the arrow down button until the garage door reaches the bottom and closes completely.
5. Proper Lubrication of the Noisy Garage Door
One thing that may be the most important one when it comes to effective functioning of your garage door is proper lubrication. It helps get rid of the squeaky noise when the garage door opens and shuts. And also ensures its smooth and seamless functioning. When lubricating the garage door, the best option is to use a garage door lubricant. This especially works well for the parts of garage door such as the chain rail, metal rollers, ball bearings, hinges, stems, nubs, lock and the arm bar. You can use WD-40 Multi-Use-Product as a garage door lubricant . It not only lubricates the garage door the right amount. But it also provides a protective covering against moisture that leads to rust and corrosion.
WD-40 is a top choice for lubricating garage doors and has been keeping them in top shape for over 60 years. It is widely used because it not just provides lubrication to the garage doors, but also helps in preventing rust and corrosion. It can also withstand heat and cold, making it ideal for garage door lubrication. It also does not get gummy or attract dust the way engine oil or mechanic’s grease tends to.
Here are the parts that you should spray with WD-40 Multi-Use-Product:
- Springs: Spray WD-40 generously on all the springs. Just make sure they are covered and not soaked
- Hinges: Lubricate the points where the hinges pivot. However, make sure you do not apply lubrication to plastic hinges as they can degrade with it
- Rollers: Apply WD-40 as a garage door lubricant thoroughly to the rollers of your garage door.
Locks: Cover the locks fully in the lubricant if you have trouble opening and closing them