If you are a car enthusiast, you would never compromise on the aesthetic appeal of your car. It is always a thrill to see your car as appealing as it was on the day you brought it home. However, there are certain distractions that prevent your car from looking its best. One of these issues is that the lights of your car getting dull over time.

It is pretty frustrating to see the headlights and brake lights of your car turn from crystal clear to dull yellow with an unwanted haze. From the 60s, car headlights have advanced from the stock sealed glass beam to modern halogen lights. Although this change is efficient and cost-effective, it comes with its own set of disadvantages.

The chemicals used for the production of polycarbonate plastic lenses of the lights often react to moisture, UV lights, sun rays, and heat, resulting in the lights becoming foggy and turn dull yellow in color. This affects the overall look of your car and causes inconvenience while driving at night.

If you are dealing with dull and foggy headlights and brake lights of your car, you need not worry about spending a fortune on getting them serviced or replaced. A simple DIY trick of using WD-40 helps you in cleaning your lights and make them return to their crystal-clear state.

Why Do The Headlights And Brake Lights Need Cleaning?

The headlights and brake lights of your car often go through extensive exposure to sun, moisture, dust, scratches, and temperature change. All these factors degrade the performance of the lights over time, resulting in them turning dull and hazy.

Honestly, there is nothing much you can do to prevent this slight damage from taking place. However, what you can do is be vigilant about the same and undertake regular cleaning of your lights to keep them functioning properly. With WD-40, you can restore the performance of the headlights and brake lights of your cars within a few minutes.

Cleaning Headlights And Brake Lights Using WD-40

WD-40 can be effectively used as a cleaner for the headlights and brake lights of your car. However, it is not advisable to keep using the liquid on a frequent basis for restoring the lights. If used frequently, the oil stands a chance to leak into the headlight bulb, causing it to get blurred or burned out. It is, therefore, always advisable to wash the lubricant off with mild automotive soap once the fog is gone and the restoration is complete. Always remember to use the liquid only when the need is dire and the lights cause difficulty in visibility.

All you need to do is follow these simple steps to defog the lights of your car using WD-40 as your lens restorer:

  1. Have a bowl of water and soap handy with you
  2. Identify all the headlights, blinkers, and brake lights on your car and wipe out any dirt or mud accumulated on them
  3. Wash the lens of the headlight or brake light thoroughly with soap and water
  4. Get a can of WD-40
  5. Spray the liquid into the lens of the light to be cleaned. Please note that it is important to keep the liquid away from the metals on your vehicle
  6. Let it sit for 5 to 10 minutes
  7. Finally, wipe the lubricant off the light with a thin and clean cloth or rag

And that is it! You have successfully cleaned the lights of your cars and restored them to their original condition.

Why Use WD-40 For Cleaning The Headlights And Brake Lights?

How To Make Sure That The Headlights And Brake Lights Of Your Car Are VisibleHow To Make Sure That The Headlights And Brake Lights Of Your Car Are Visible

One of the biggest advantages of using WD-40 for cleaning and restoring the lights of your car is the fact that along with providing a sparkling shine to the lights of your car, it also adds a protective layer to them. This makes the shine of your headlights and brake lights last longer.

Along with the headlights and brake lights of your car, you can use the same method to clean any light in your car. This will enhance your driving experience by increasing the visibility of your lights as you drive at night.

WD-40 is also helpful in removing dried stains from the surfaces of your lights to make the beams shine brighter. Instead of waiting for several hours by getting your car serviced, getting a can of WD-40 and restoring the lights of your car is a far more accessible and affordable option. As the same liquid can be used on all the lights of your car, you need not worry about purchasing different products to get your car cleaned.

Dealing With Chrome Accents Around The Lights

If there are chrome accents around the lights or any other metal on your car that is prone to rust, you can deal with the same with WD-40. All you need to do is identify specific portions that need to be cleaned and spray the liquid on the crevices around the car lights. Wipe it off with a clean cloth and you are good to go!

This allows you to protect the metal in the designated area by preventing the build-up of unwanted moisture and rust. Spraying WD-40 on the metal and rubbing the area with a clean cloth in a circular motion helps you get rid of water stains, marks, and grime.

If you are passionate about keeping your car in a sparkling condition and are not willing to make any compromise in taking care of your precious vehicle, WD-40 helps you in dealing with a range of adversity within a few minutes.

A single can of WD-40 can be used to clean the headlights and brake lights of your car, making your car rust-free, getting rid of dirt and grime, and ensuring the overall well-being of the vehicle. Provided you are vigilant enough to use the product the right way, WD-40 helps your car enjoy a long and healthy life!