matomo

How to Fix Squeaky Door Hinges

Have you found yourself with squeaky door hinges?  If the answer is yes, then read on to find out how a can of WD-40 can fix the squeakiness.  Here is an account of how you can go about lubricating your squeaking doors:

Remove the Hinge Pin

The first thing to do when tackling a squeaky hinge is to remove it for maintenance. For this purpose, close the door and ensure that you have got a hammer and nail punch at your disposal. Place the nail punch at the bottom of the door hinge and tap it with the tip of your hammer. Once the pin has been loosened enough, you should be able to easily pull it out using the back end of your hammer or a flathead screw driver. If you are dealing with a rusty hinge then it won’t be so easy to remove it.

WD-40 will loosen the rust on the hinge pin enough for you to remove it with east. Remember that the nail that you use for loosening the door hinge will be rendered useless.

Since hinge pins hold the door in its place, it is essential to prop the door up before removing the pins.

Coat the Hinge Pins With a Lubricant

Once the hinge pins have been removed, it is time to coat them with a lubricant. The lubricant will help that the hinge pins are able to live for longer. With many to choose from, it may seem overwhelming to choose. WD-40 is a lubricant and rust inhibitor so you get the best of both. Corrosion-free. All there is to do is give the door hinges generous spray of WD-40, give the product a generous amount of WD-40.

Put It Back In

After the hinge pin has been lubricated—preferably with the power of WD-40—it is supposed to be replaced into the door hinge. Wiggle the pins back into the door hinge until the door hinge is in a position that is stable enough for you to use the combination of hammer and nail again. Once that is done, try opening and closing the door several times. After opening and closing the door, you will see that the squeakiness is all gone.

Why Use WD-40 for the Job

When you take it all into perspective, you have got to say that enough stress cannot be laid into the usage of WD-40 for lubricating doors. However, to aid your choice, here are some of the most important reasons for you to consider:

Rusted Hinge Pin

If your hinge pin is rusted, its removal will certainly be a tough task. WD-40 will loosen the stuck hinge pin enough for you to remove it with ease.

Simplified Job

When you speak of lubricating your hinge pin with any other lubricant, make sure to have the hinges removed for maximum benefit. WD-40 will take all the fuss away because it is a liquefied spray (gets right into the tightest of spots).

Just a Side Job

When you speak of WD-40, it is a fact that lubricating doors and soothing squeaky hinges is just a side job for this wonderful product. WD-40 has been known to be useful in more than two thousand jobs, meaning that it is a product that you will not have to invest in just for lubricating your door hinges. Prepare to enjoy taking care of all your ‘chores’.

Disclaimer

The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.

Contact Us

Pidilite Industries Regent Chambers, 7th Floor Jamnalal Bajaj Marg 208 Nariman Point Mumbai 400 021, India

© 2019 WD-40 Company