Garden maintenance is key but often sounds so tiresome. Whilst there is some work to be done, just think of how beautiful the result will be. Maintenance goes a long way but it is the first step to a breath-taking garden. To make the job easier, it is recommended to store your garden tools before the chills of winter hit.
From rakes to shovels to trowels to garden forks, there are a number of garden tools that you must be in the possession of if you own a garden. The preparation required before any of these tools is put into storage is pretty much standardised.
Clean your garden tools as soon as you are done using them to reduce workload. However, if you find your garden tools to be dirty, you will need to put on pairs of goggles and gloves before scrubbing off all the mud and dirt with a stiff brush. Steel wool can also be used to take care of the job, especially the rusted spots.
Depending upon the nature of the dried dirt and rusted spots, there is a high chance of you needing to put in a lot of elbow grease. If you are not a fan of more work than it is recommended for you to make use of WD-40. WD-40 will not only degrease all the accumulated dirt and gunk on your hand tools but get rid of the rust spots too.
Sharpening the tools before putting them into the storage garage can do wonders in the long run. Tools which have a sharp edge will cut better but this should be done with the right kind of files. If you don’t have them then head to the nearest hardware store and get some. Just remember to take care of your safety. Wear some gloves while you file to sharpen cutting equipment.
Once the tools have been sharpened, it is time for you to spray them with a lubricant before putting them into storage. Some tool owners are of the perception that oil is what is needed to take care of the lubricating needs of their tools. Well, they are mistaken because WD-40 will. It is because oil will not only lubricate your garden tools but serve to protect them as well. The reason for this lies in how WD-40 is a water displacement wonder by protecting your tools from rust and with lubricating abilities. After the tools have been soaked in WD-40, they are ready to be put into storage for the winter.
When you speak of putting your lawnmowers into storage for the winter, the fact of the matter is that there is only one thing that you are truly worried about: the lawnmower blades. The performance of your lawnmower depends directly upon the condition of your lawnmower blades. It is important that they are in great condition especially whilst storing them in the winter time.
If you think about it, there are a number of threats that tools storage poses to your lawnmower blades, with corrosion being at the top of the list. The usage of WD-40, in this regard, will ensure that most of these concerns are taken care of. The application of WD-40 onto your lawnmower blades is not only essential for getting rid of the stuck grass but it is also imperative for ensuring that the blades do not fall victim to the scourge of corrosion.
Moreover, it also recommended for you to drain your lawnmower empty of all the fuel, owing to how putting the lawnmower into storage with a fuel tank that is not empty will do more harm than good. It is because stagnant fuel will, over the course of time, degrade the plastic and rubber parts of your lawnmower. On top of that, the fuel attracts moisture which has got the ability to corrode the fuel tank.
When you take it all into perspective, you have got to say that WD-40 is nothing short of a blessing when it comes to garden tools storage for the winter. Had it not been for the magic of WD-40, garden tools storage would have been significantly tougher.
The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.
© 2020 WD-40 Company