How To Remove Rust From Your Wristwatch?
Watches never go out of fashion. For decades, watches have served as a means to define the style statement of an individual, and in some cases, an entire generation. If you are a lover of wristwatches, seeing your favourite article get rusty and corroded is utterly heart-breaking. This is the reason why the older generation used to take the utmost care of their watches and make them last for several decades.
If you are not able to make your watch last for decades, the least you can do is maintain it on a regular basis. It is very common for watches made of metal to get rusted over time. On prolonged exposure to moisture, the surface of your wristwatch may develop a rust accumulation. This not only spoils the aesthetic appeal of the item but also damages it from within. A rusty watch would not last long as the rust would slowly contaminate different components from outside in. This makes it important to cater to your prized possession before it is too late.
If you are looking for a quick and effective DIY solution for removing rust from your wristwatch, you can always use the WD-40 Multi Use Product for doing so. By spraying the liquid a couple of times on your watch, you can get rid of the nastiest rust stains and make the article as good as new.
WD-40 readily penetrates the surface of your watch and combines with the rust stains to be removed. After some time, it loosens the particles and makes it easy for you to get rid of them.
From start to finish, here are the simple DIY steps involved in removing rust from your wristwatch:
Things you will need
Microfibre cloth
Warm soapy water
Smooth washcloth
Dry towel
Wire brush
Sandpaper
Step 1
Clean The Initial Layers Of Dust
Before you start with the serious cleaning business, make sure you wipe off the initial layers of dust from the surface of your watch. It is advisable to take a smooth microfibre cloth doing so to ensure the high efficiency and safety of your watch. If you are specifically dealing with the dial of your watch, you can detach it from the body while cleaning it (if possible).
Step 2
Clean The Watch With Warm Soapy Water
Once the initial layer of dust is cleaned, you can prepare a solution of warm soapy water. This would help you clean the stains and dirt that are not too nasty. Take a soft washcloth, dip it in the solution, and clean your wristwatch with the same.
Step 3
Dry Your Watch Completely
Once you are done cleaning your watch with soapy water, make sure you dry it completely before performing any other activity. You can use a dry towel or a blow-dryer for drying your watch.
Step 4
Spray WD-40 For The Nasty Rust Stains
Especially if you are dealing with rust stains that are old and nasty, cleaning your watch with soapy water will not be enough. It would require you to repeat the process multiple times before you see the desired results. Instead, you can get yourself a can of WD-40 Multi Use Product and spray it on your watch.
Make sure that you spray just enough liquid to cover the affected areas. Avoid spraying a lot as it may lead to unwanted wastage and damage your watch. Once you have sprayed WD-40, let it sit for a few minutes. This would allow the liquid to work its magic on the rust stains.
Step 5
Use A Wire Brush To Remove The Rust
After waiting for a few minutes, you can remove the rust from your wristwatch using a wire brush. Make sure you clean the surface smooth to avoid damaging your article.
Step 6
Use Sandpaper To Remove Leftover Rust (If Needed)
If you still find some rust stains after cleaning your watch with a wire brush, you can scrape the remaining stains off the article with sandpaper. This is to compensate for the cleaning that may have been missed out by the brush.
Final Word
WD-40 makes it extremely easy for anyone to clean their wristwatch within a few minutes. By using WD-40 Multi Use Product, you add a protective layer to your valuable watch, preventing it from getting rusted again in near future.
Disclaimer
The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.
Related Tutorials
February 7, 2022
November 25, 2021
December 17, 2021
November 22, 2021
November 27, 2021
Related Products
Need some advice?
Come and discover all our DIY, maintenance, auto, bicycle tutorials!
