If you are an avid bike lover and enthusiast, you ought to love smooth and frictionless rides. Bike lovers often take the safety and maintenance of their vehicles very seriously. Nothing makes them angrier than seeing their prized possessions in a faulty state.
When it comes to bike maintenance, the chain plays a very important role. It determines how your bike would perform and how your riding experience would be. Keeping your bike chain oiled and lubricated is extremely important to enjoy your rides to the fullest.
If your bike chain is exposed to natural elements for way too long without getting any attention, it would start ageing rapidly. In the majority of modern bikes, the chains are not covered and are exposed to dust, water, and dirt directly. This increases the chances of it getting damaged rapidly. Oiling your bike chain would help you make your rides smoother and extend the life of the chain.
If you want to oil your bike in a hassle-free way at home, the WD-40 Multi Use Product allows you to tend to your vehicle in the best way possible. With WD-40, you can lubricate the chain of your bike with a simple spray.
Here are the simple steps to follow in order to oil your bike without heading out of your home.
Although it sounds odd, the best way to start the oiling session for your bike is to take it for a ride for around 10 minutes. This would help you build a little temperature within the chain which would loosen the grime and make it easier for the lubricating liquid to penetrate.
Once you are done with your ride, park it safely, remove the keys, and mask the wheels of your bike. This prevents the chemical from being sprayed on the wheels and causing unwanted issues. You can simply mask the tyres with the help of a big plastic sheet.
It is always advisable to oil your bike chain when it is free from dirt and grime. For this, you can use a grunge brush and/or a soft bristle brush based on how nasty the grime is. As you clean the chain, make sure that the brush stroke is along the length of the chain. You can use a chain cleaner if the bike chain gets dry.
Once you are done getting rid of the grime off the chain, you will need to wipe it dry using a cotton rag or an old t-shirt. Never start oiling a chain that is still wet.
Now is the time for WD-40 to show its magic! Once your bike chain is clean and dry, all you need to do is spay WD-40 Multi Use Product on it. The liquid would penetrate into the surface and lubricate the chain to provide you with a smooth and frictionless riding experience. However, make sure you do not end up spraying a lot of liquid with the assumption that it would provide you with better results. A couple of sprays would do the trick for you. Rotate the wheels a few times to ensure that the liquid has spread evenly throughout the chain.
Never make the mistake of leaving your vehicle as it is after spraying WD-40 on the chain. Make sure you wipe off the excess liquid using a cotton rag or an old t-shirt before you end the process.
Disclaimer
The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.
November 27, 2021
November 24, 2021
November 23, 2021
November 29, 2021
© 2025 WD-40 Company.
All Rights Reserved