How To Clear A Clogged Sink Drain?
No matter how beautiful your kitchen looks, a clogged sink drain has the potential to ruin the complete look of the place. A dirty and clogged sink drain is the last thing you’d want to see while cleaning it. However, if the damage is done, there is no way but to step up and clean it well.
A skin drain often gets clogged due to the accumulation of hair, soap residue, grease, tepid water, and other impurities over time. If a clogged drain is not cleared, it may lead to an accumulation of water in the sink and a range of other issues you’d never want to come across!
People often make the mistake of avoiding cleaning their sinks until the damage gets too serious. It is important to note that it is the smaller articles that lead to the clogging of your sink over time. Instead of spending more time and energy clearing the sink later, it is advisable to clean it on a daily basis.
However, if the damage is already done and you have a clogged sink drain at your disposal, there are different ways in which you can deal with the issue.
People often resort to using a plunger to clear clogged sink drains. Generally, plungers are used to handle minor blockages and remove smaller particles. Using a plunger allows you to create pressure in the sink that gets the clog moving, thereby clearing the sink drain. As the plunger does not come in direct contact with the drainpipe, you do not need to worry about getting it damaged.
Another common way of clearing a clogged sink drain is by using a drain snake. A drain snake is used when the damage is a little more and cannot be handled using a plunger. Here are the steps you can follow to clear your clogged sink drain using a drain snake:
1. Open the sink trap, preferably using a pipe wrench.
2. Insert the drain snake into the sink drain.
3. Now, crank the drain snake back and push it clockwise. This will help you clear the drain.
4. Remove the drain snake and run the drain.
While using a drain snake is a more effective approach than using a plunger, it often requires a lot of time and effort. Moreover, you may end up getting dirty from all the build-up and muck clogging your sink drain in the attempt of clearing it.
Finally, if you are looking for a quick and effective solution for clearing the clogged sink drain, WD-40 helps you resolve the issue in the best way possible. The liquid is potent to react with the clog, loosen it, and get it moving, leading to a clear sink within minutes.
Here are the key steps you should follow for cleating a clogged sink drain using WD-40:
Things you will need
A plunger
A drain snake
A pipe wrench
Step 1
Get A Can Of WD-40 Multi Use Product
First of all, get yourself a can of WD-40 Multi Use Product. You can either buy it online or get it from a hardware store near you. To handle household issues during emergencies, it is advisable to keep a can handy at all times. Apart from clearing a clogged sink, the liquid can be used for a range of other purposes in and around the house.
Step 2
Spray The Liquid In The Drain
Open the sink trap and spray some liquid within the drain. Make sure that the amount of liquid you spray is in sync with how bad the clogging is. If the clogging is severe, you will need to spray more to tackle the nasty clog.
Step 3
Let It Rest
After spraying WD-40 in the drain, let the liquid rest for around 10 minutes. This will give it time to react to the clog, loosen it, and clear your sink. Make sure you don’t wash the drain or disturb it too soon.
Step 4
Wash It Off With Water
After letting the sink rest for a while, you can simply wash the drain off with normal water. You would be surprised to see how easily the clogged drain would be cleared without making any effort.
Once the clogged sink drain is cleared, make sure you are careful while using the sink again. Do not let unwanted articles remain in the sink and clear it on a regular basis to prevent them from clogging again.
This is how WD-40 Multi Use Product would provide you with a clear sink drain within a few minutes. The liquid seeps right under the muck and build-up clogging the drain and loosening the particles that can be washed away easily. WD-40 ensures that you don’t need to take the risk of using a drain snake and resolve issues that are beyond a simple plunger to handle.
Another major advantage of using the WD-40 Multi Use Product is that it helps you get rid of rust in your sink drain as well. WD-40 is known for tackling the nastiest rust stains forming on various household items. Along with clearing your sink drain off the unwanted muck, the liquid helps you get rid of rust stains as well. Moreover, once sprayed, you can rest assured that it would prevent rust formation on and within the drain pipes any time soon.
Instead of calling a plumber right away, WD-40 helps you clear your clogged sink drain without any external help. Also, it doesn’t require any other article apart from the spray to get the work done. It is a quick and economic way of tending to your sink and keeping it clean.
Final Word
Staying true to the name, the WD-40 Multi Use Product can be used to resolve more than one issue regarding your sink drain. Right from clearing the clogged sink to protecting it from rust, a single can of powerful liquid helps you look after your sink in an efficient and sustainable manner.
Disclaimer
The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.
Related Tutorials
November 25, 2021
March 1, 2022
November 22, 2021
Related Products
Need some advice?
Come and discover all our DIY, maintenance, auto, bicycle tutorials!
Language
Contact Us
© 2025 WD-40 Company.
All Rights Reserved