tracking

Removing Rust from tools by using WD-40® as a Rust Remover

Rust is created from a chemical reaction between iron and oxygen. If left untreated, rust can ruin the object and it is an eyesore. As it corrodes even more and more metal is affected by rust, it will weaken the metal until it is no longer useful. Removing rust is important and you need to do it as soon as possible. WD-40 is a great rust remover as it breaks down the bond between the metal and the rust.

First, spray the rusted item with WD-40 Multi-Use Product. You will need to ensure that you use enough to soak the area then allow it to sit for 10 minutes. Then use a wire brush to remove the rust from the item. Then repeat the process.

Sandpaper is also an effective rust remover, so you can use this to remove any remaining rust. You don’t want to leave any rust on the item as it will contribute to the growth of more rust.

Reapply WD-40 Multi-Use Product to help remove the stubborn rust and continue with brushing and sanding.

Once you have achieved removing rust from the item, coat the surface with WD-40 to rustproof the item from further corrosion as WD-40 will act as a barrier.

Disclaimer

The uses shown and described for WD-40 Multi-Use Product were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggestion for use by WD-40 Company. Common sense should be exercised whenever using WD-40 Company products. Always follow the instructions and take heed of any warnings printed on the packaging.

Contact Us

Pidilite Industries Regent Chambers, 7th Floor Jamnalal Bajaj Marg 208 Nariman Point Mumbai 400 021, India

© 2020 WD-40 Company